Before you begin
Your system administrator might already have set these parameters for you. If your administrator set up
PIN protection, you need the PIN number before continuing with the configuration.
Procedure
1. The quick setup wizard automatically appears the first time you access the Scopia XT Series,
either by turning on the XT Codec Unit or logging in to the web interface.
If the quick setup wizard is not displayed automatically when you first turn on the XT Codec
Unit, select
Configure
>
Quick Setup
from the Main Menu.
Figure 51: Accessing the Quick Setup
2. The quick setup wizard guides you through these basic configuration tasks:
•
Setting the System Name and Language
on page 84: Define your system's name,
your country, and preferred language for the interface.
•
on page 85: Adjust your monitor's image if necessary.
Important:
This task is not available from the web interface. If you are configuring from the web
interface, perform this procedure from the endpoint.
•
on page 87: Define your system's network settings to
allow you to place and receive calls.
•
Configuring Gatekeeper Settings
on page 89: If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 83
