Figure 62: Setting regional information
3. Define regional settings as described in
Table 18: Configuring regional information
on page
98.
Table 18: Configuring regional information
Field Name
Description
System name
Enter the name that will appear in the local endpoint interface and in
the remote endpoint interface (if connected).
Country
Select the country in which the local system is located. Once the
country is selected, the other fields are populated automatically.
Language
Select the language used in the XT Series endpoint's interface.
Audio coding
Select the
European
or
US
coding.
Video frequency
The video refresh frequency depends on the country, and may
assume the values of
50Hz
or
60Hz
. You can select the video
frequency automatically or manually. If set to automatic, the system
assigns the value depending upon the selected country. In Japan,
the frequency depends on the country area (east or west); thus in
Japan the system administrator must select manually the correct
value related to the geographic location.
4. Select
Save
.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 98
