RADVision Scopia XT5000 Series, Руководство по установке

Страница: 35 / 184

Chapter 5 | Setting up the Scopia XT Series
After reading the section Prerequisites for Setting up the System on page 32, you can install the Scopia XT Series.
These sections describe how to install the XT Codec Unit and connect its accessories:
Navigation
•
Mounting the XT Codec Unit on page 35
•
Connecting Scopia XT Series to Your Network on page 35
•
Connecting a Computer to the Scopia XT Series on page 36
•
Selecting the Computer Display Resolution on page 38
•
Connecting Audio Equipment to the Scopia XT Series on page 39
•
Connecting the Video Equipment to the Scopia XT Series on page 47
•
Installing the Batteries of the XT Remote Control Unit on page 59
Mounting the XT Codec Unit
About this task
Follow the guidelines in this section to correctly place the XT Codec Unit.
Procedure
Place the XT Codec Unit following these guidelines:
• Place the XT Codec Unit on a horizontal surface which stands firmly on its base.
• The surface must be dry and free of dust, oil and other residues.
• Leave enough space for air circulation and for connecting cables easily.
• Place the XT Codec Unit anywhere within 5 meter reach of the camera cables.
Caution:
Do not place the camera on top of the XT Codec Unit. It can cause the system to overheat.
Installation Guide for Scopia XT5000 Series Version 3.2 Setting up the Scopia XT Series | 35