RADVision Scopia XT5000 Series, Руководство по установке

Страница: 79 / 184

Remotely Enabling the License from the Web Interface
About this task
This procedure describes how to enable the software license of an XT Codec Unit remotely via the web
interface. You can also enable the license from the endpoint's interface, as described in
Enabling the
License from the Scopia XT Series Endpoint on page 80.
If you do not yet have your license key, you can set up the system in demo mode for a period of 24
hours. After this time, you must enable your license key to use the system.
Before you begin
Obtain a license key for the Scopia XT Series as described in Registering the Scopia XT Series to
Obtain a License Key on page 75 or, if you are enabling a license option to extend Scopia XT Series
functionality, see Installing and Enabling Licenses which Extend System Functionality on page 76.
Procedure
1. Access the Scopia XT Series web interface.
2. From the Home page, select Enable License , or, navigate to Administrator Settings >
Utilities > Licenses .
Figure 48: Accessing licenses from the Scopia XT Series home page
The Licenses page appears.
Installation Guide for Scopia XT5000 Series Version 3.2 Initial Configuration | 79