RADVision Scopia XT5000 Series, Руководство по установке

Страница: 36 / 184

Connecting Scopia XT Series to Your Network
About this task
Your Scopia XT Series has two GLAN 10/100/1000 ports for connecting to the network.
Important:
GLAN2 is available in selected models only. For more information, refer to Comparing Between
Scopia XT Series Models on page 12 and Installing and Enabling Licenses which Extend System
Functionality on page 76.
You can use both ports for connecting to the private and public network, however we recommend that
you always connect the private network to the second GLAN port, whether one router interfaces with the
Scopia XT Series or multiple routers interface with the Scopia XT Series (
Figure 16: Connecting the XT
Codec Unit to a private and a public network on page 36).
Figure 16: Connecting the XT Codec Unit to a private and a public network
For more information, see Planning NAT and Firewall Traversal with Scopia XT Series on page 22.
Connecting a Computer to the Scopia XT Series
About this task
Use a computer to share a presentation or other PC content during a call. This procedure describes how
to connect computers that are equipped with a DVI-out or VGA-out connector.
Installation Guide for Scopia XT5000 Series Version 3.2 Setting up the Scopia XT Series | 36