RADVision Scopia XT5000 Series, Руководство по установке

Страница: 22 / 184

The Scopia XT Series SMB Edition includes the following options:
• Full SMB4 - Basic MCU level with up to four participants: 1 local and 3 remote mixed endpoints
and PC clients.
• Full SMB9 - Advanced MCU level, with up to 9 participants:
–
One local and eight remote endpoints
Or
–
One local and seven mixed endpoints and PC clients
Figure 9: Scopia XT Series SMB Edition Deployment on page 22 shows a typical topology for the
Scopia XT Series SMB Edition solution. For more information, see the Solution Guide for Scopia
Solution .
Figure 9: Scopia XT Series SMB Edition Deployment
Planning NAT and Firewall Traversal with Scopia XT Series
The Scopia XT Series fully supports NAT and firewall traversal, enabling you to place the unit behind a
NAT router or firewall and connect with other endpoints seamlessly. This section describes the available
methods to incorporate NAT and firewall traversal with XT Series:
• Using a Radvision HTTP server or a STUN public server for NAT and firewall traversal
When the XT Series hosts a videoconference with endpoints outside the enterprise ( Figure
10: Using an HTTP/STUN Server for NAT and Firewall Traversal on page 23), it first queries the
Installation Guide for Scopia XT5000 Series Version 3.2 Planning the Topology of the Scopia XT Series Deployment | 22