Configuring Gatekeeper Settings
About this task
A gatekeeper routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP
address of an endpoint, and handles the initial connection of calls. If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings as described in this procedure.
This procedure completes the basic system configuration.
If you are modifying these settings after initial setup, navigate to
Configure > Network > H.323
from the
Main
menu. For more information, see
Registering the Scopia XT Series with a Gatekeeper
on page
125.
Before you begin
This procedure is performed as part of the basic configuration after
page 87. Consult with your network administrator to configure these fields.
Access the quick setup wizard from the endpoint or web interface, as described in
Procedure
1. Set the
Use Gatekeeper
list to
Yes
.
Figure 56: Gatekeeper settings
2. Set the
Mode
list to
Manual
.
Installation Guide for Scopia XT5000 Series Version 3.2
Initial Configuration | 89
