1260-00C User Manual
Local Command Set 4-61
interrupt, as configured using either the
SrcTrig
or
EnableSense
function.
Response:
Program response: 0
Console response:
Line: <line text>, configured to
generate an REQT for Logical Address
<la>.
<CRLF>
where the meaning of
<line text>
corresponds
to the value of
<line>
as follows:
Value of
<line>
Value of
<line text>
0 to 7
TTL <line>
8 to 9
ECL (<line> - 8)
50
TCNTR
60
TICK1
Example:
Set up Logical Address 4 to assert SRQ when a
trigger interrupt occurs on TTL trigger line 2.
TrigToREQT 4, 2
UMapTrigTrig
Purpose:
Unmap a specified TTL, ECL, Star X, Star Y,
external connection (GPIO), or miscellaneous signal
line that was mapped to another line using the
MapTrigTrig
function.
Query
Syntax:
UMapTrigTrig <srcTrig>, <destTrig>
where
<srcTrig>
is the source line to unmap
from a destination, and the value of
<destTrig>
corresponds to the destination line mapped from
the source:
Value Trigger Line
0 to 7 TTL trigger lines 0 to 7
8 to 9 ECL trigger lines 0 to 1
40 to 49 External source/destination (GPIO 0 to 9)
40
Front panel In (connector 1)
41
Front panel Out (connector 2)
42
Front panel In (unbuffered)
43
Connection to EXTCLK input pin
44 to 49 Hardware-dependent GPIOs 4 to 9
50
TIC counter pulse output (TCNTR)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
