38
RIDA qLine® autoBlot | User manual
will not take place and the work-list will
be invalidated. This feature should only be
used if the user has made a drastic mistake
in the work-list and would like to start it
from scratch later on.
When the strip processing completes,
the imaging will automatically start. The
screen that is active during the imaging
is shown in Figure 33.
The value on the left shows the current
trough being scanned while the number
of the right shows the total number of
troughs that need to be scanned. In a
work-list of 2 troughs, the number of
trough images being taken is 2.
When imaging completes, the data will
be automatically saved on the instrument,
ready for processing by the RIDA qLine®
Soft.
Figure 32:
The button
which can trigger the
cancellation of the entire
work-list
Figure 33:
The screen that is shown during
the scanning at the end of the work-list
