49
7. Remove the Strip Holder from the tray. Remove strips and store or discard as required.
8. Wipe down the interior with microsol or alcohol wipes.
9. Clean the Sample Carousel, Tip Rack and Strip Holder with microsol or
alcohol wipes and reinsert into the instrument.
10. Close the instrument door.
11 Troubleshooting
For any difficulties that are experienced with the instrument, consult the guidelines
below for possible resolutions. If the guidelines do not resolve the issue, informing
qualified service engineers of the steps that have already been taken via this section
will help return the instrument to full working order as quickly as possible.
11.1 Simple Troubleshooting
11.1.1 Visual Inspection
A good visual inspection of the instrument prior to switching it on can sometimes
reveal problems or potential problems. Performing the following simple checks will
help determine the condition of the instrument.
Check for any signs of obvious damage. With the instrument switched OFF, raise the
main cover, and inspect the base of the instrument for any spillages or obstructions
that will prevent the accessories from resting flat on the instruments base. Remove
all the accessories from the base and clean with a lint free cloth.
