26
RIDA qLine® autoBlot | User manual
The engineering tab can be deactivated
by repeating the above steps until a similar
‘engineering has been deactivated’
message is shown.
If the back button is pressed while
engineering is set to active, an additional
entry will be found next to the ‘Cleaning’
tab, one called ‘Engineering’.
6.1.2 Logging Tab
The logging tab can be found to the right
of the information tab (see Figure 14). This
is a tab which provides a preview of the
most recent events that were logged by t
he software, including the ability to copy
all of the log files from the past 5 days to
a USB device that may be connected to
the instrument.
If as a user you witness unusual behaviour
that you would like to report to your
service provider, the instrument logs
should be copied using this tool and
forwarded along with your report.
Figure 13:
The message that is shown
when the engineering tab has been
activated
Figure 14:
The logging tab
of the system menu
