![background image](http://html1.mh-extra.com/html/quest-engineering/dr4300e/dr4300e_owners-manual_772522149.webp)
DR4300 Owners Manual
Installing the optional hard drive backplane (rear)
149
CAUTION:
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1. Align the notches on the backplane with the notches on the chassis.
2. Lift the release pin and slide the backplane toward the back of the chassis until firmly seated.
3. Release the release pin to lock the backplane to the chassis.
4. Reconnect all the cables to the backplane.
Figure 76. Installing the
optional
2.5 inch (x2) hard drive backplane
a. SAS cable
b. release pin
c. hard drive connector (2)
d. power cable
e. backplane signal cable
1. Install both the hard drives in their original location.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Before working inside your system
See also:
After working inside your system
Related references
See also:
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...