DR4300 Owners Manual
Removing memory modules
82
4. If installed, remove the cooling fan assembly. For more information, see the Removing the cooling fan
assembly section.
NOTE:
The memory modules are hot to touch for some time after the system has been powered down.
Allow the memory modules to cool before handling them. Handle the memory modules by the card edges
and avoid touching the components or metallic contacts on the memory module.
CAUTION:
To ensure proper system cooling, memory module blanks must be installed in any
memory socket that is not occupied. Remove memory module blanks only if you intend to install
memory modules in those sockets.
1. Locate the appropriate memory module socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the
middle of the memory module or metallic contacts.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the
memory module socket.
3. Lift and remove the memory module from the system.
Figure 17. Removing the memory module
a. memory module
b. memory module socket
c. memory module socket ejector (2)
1. Install the memory module.
NOTE:
If you are removing the memory module permanently, install a memory module blank.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Before working inside your system
See also:
See also:
Removing the cooling fan assembly
See also:
After working inside your system
Related references
See also:
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...
