manualshive.com logo in svg

Quest Engineering DR4300e, Руководство пользователя

Поделиться
Скачать
Quest Engineering DR4300e Скачать руководство пользователя страница 121

DR4300 Owners Manual

Removing the network daughter card

121

Network daughter card

The Network daughter card (NDC) is a small, removable mezzanine card. The NDC provides you with the

flexibility of choosing different network connectivity options, for example—4 x 1GbE, 2 x 10GbE and 2 x

Converged Network Adapter.

Removing the network daughter card

1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. If installed, remove expansion card(s) from the expansion card riser 2.
4. Keep the Phillips #1 screwdriver ready.

 

CAUTION: 

Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is not

authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are

shipped with your product.

1. Loosen the captive screws that secure the network daughter card (NDC) to the system board.
2. Hold the NDC by the edges on either side of the touch point and lift the card to remove it from the connector

on the system board.

3. Slide the NDC away from the back of the system until the Ethernet connectors are clear of the slot in the

back panel.

4. Lift the NDC out of the chassis.

Figure 51. Removing the NDC

Содержание DR4300e






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды