![background image](http://html1.mh-extra.com/html/quest-engineering/dr4300e/dr4300e_owners-manual_772522156.webp)
DR4300 Owners Manual
Installing the I/O panel
156
CAUTION:
To prevent damage to the I/O cable, you must release the locking tab before removing or
installing the I/O cable from the connector on the hard drive backplane.
1. Rotate the locking tab on the I/O cable connector clockwise 90 degrees to release the lock.
2. Disconnect the I/O cable from the backplane.
3. Remove the screws securing the I/O panel to the chassis.
4. Pull out the I/O panel cable through the channel on the chassis.
Figure 83. Removing the I/O panel
a. I/O panel cable
b. hard drive backplane
c. screw (3)
d. I/O panel
e. chassis
1. Replace the I/O panel.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Before working inside your system
See also:
Removing the hard drive backplane
See also:
See also:
After working inside your system
Related references
See also:
Installing the I/O panel
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the T15 Torx screwdriver ready.
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...