manualshive.com logo in svg

Quest Engineering DR4300e, Руководство пользователя

Поделиться
Скачать
Quest Engineering DR4300e Скачать руководство пользователя страница 56

DR4300 Owners Manual

Integrated Devices

56

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as

optical drives.

Port I

Sets the drive type of the selected device. For 

Embedded SATA settings

 in 

ATA

 mode, set this field to 

Auto

 to

enable BIOS support. Set it to 

OFF

 to turn off BIOS support.

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as

optical drives.

Port J

Sets the drive type of the selected device. For 

Embedded SATA settings

 in 

ATA

 mode, set this field to 

Auto

 to

enable BIOS support. Set it to 

OFF

 to turn off BIOS support.

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option
Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as

optical drives.

Related tasks  

See also: 

Viewing SATA Settings

Related references  

See also: 

SATA Settings

Integrated Devices

You can use the 

Integrated Devices

 screen to view and configure the settings of all integrated devices including

the video controller, integrated RAID controller, and the USB ports.

Related tasks  

See also: 

Integrated Devices details

See also: 

Viewing Integrated Devices

Related references  

See also: 

System BIOS

Содержание DR4300e






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды