Quest Engineering DR4300e, Руководство пользователя

Страница: 9 / 181

DR4300 Owners Manual
Front panel features and indicators
9
management port is USB 3.0-compliant. Item 8 is Quick Sync, that indicates a Quick Sync enabled system. The Quick Sync
feature is optional and requires a Quick Sync bezel. This feature allows management of the system using mobile devices.
This feature aggregates hardware or firmware inventory and various system level diagnostic and error information that can be
used in troubleshooting the system. For more information, see the Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanualsDell.com/idracmanuals
Item Indicator, Button, or
Connector
Icon Description
1 System identification
button
Enables you to locate a particular system within a
rack. The identification buttons are on the front and
back panels.
Press the system identification button to turn the
system ID on or off.
• If the system stops responding during
POST, press and hold the system ID
button (for more than five seconds) to
enter BIOS progress mode.
• To reset the iDRAC (if not disabled in F2
iDRAC set up) press and hold the button
(for more than 15 seconds).
2 Power button Enables you to know the power status of the system.
The power indicator turns on when the system
power is on. The power button controls the power
supply output to the system.
NOTE: On ACPI-compliant operating
systems, when the power button is used to
shut down the system, the operating system
performs a graceful shut down the system
power is turned off.
3 NMI button Enables you to troubleshoot software and device
driver errors when running certain operating
systems. This button can be pressed by using the
end of a paper clip.
NOTE: Use this button only if directed to
do so by qualified support personnel or
by instructions in the operating system’s
documentation.
4 Information tag Contains system information such as service
tag, NIC, MAC address for your reference. The
information tag is a slide-out label panel.
5 Hard drives Up to twelve 3.5-inch hot-swappable hard drives.
6 USB management port/
iDRAC Direct
The USB management port is USB 2.0 compliant.
Enables you to connect USB devices to the system
or provides access to the iDRAC Direct features. For
more information, see the Integrated Dell Remote
Access Controller User’s Guide at
Dell.com/
idracmanuals
.