DR4300 Owners Manual
Installing the riser 1 blank
108
b. tab (2)
c. riser 1 blank
1. Install the expansion card risers.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Before working inside your system
See also:
Removing expansion card risers
See also:
Installing expansion card risers
See also:
After working inside your system
Related references
See also:
Installing the riser 1 blank
CAUTION:
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1. To install the riser 1 blank, align the blank with the slot on the chassis and insert it into the chassis until it
clicks into place.
Figure 37. Installing the riser 1 blank
a. slot on the chassis
b. tab (2)
c. riser 1 blank
1. Install the expansion card risers.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...