![background image](http://html1.mh-extra.com/html/quest-engineering/dr4300e/dr4300e_owners-manual_772522097.webp)
DR4300 Owners Manual
Integrated storage controller card
97
CAUTION:
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1. Align the cable retention bracket with the alignment pins on the chassis.
2. Slide the cable retention bracket along the chassis wall until the tab clicks and locks the keyhole slots.
3. Place all cables to be routed in the cable retention bracket.
Figure 29. Installing the cable retention bracket
a. alignment pin (2)
b. keyhole slot
c. tab
d. cable retention bracket
1. Install the PCIe card holder.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related tasks
See also:
Before working inside your system
See also:
See also:
See also:
See also:
Installing the PCIe card holder
See also:
After working inside your system
Related references
See also:
Integrated storage controller card
Your system includes a dedicated expansion card slot on the system board for an integrated controller card. The
integrated storage controller card provides the integrated storage subsystem for the internal hard drives in your
system. The controller
supports SAS and SATA hard drives and also
enables you to set up the hard drives in
RAID configurations. The RAID configurations depend on the version of the storage controller included with your
system.
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...