Quantum Scalar i6000, Руководство пользователя

Страница: 152 / 738

Chapter 3: Configuring Your Library
Working With Partitions
134 Quantum Scalar i6000 User’s Guide
Prefix , Suffix , and Pass Through . The bold, underlined portion is the
media identifier.
Table 25 Return Media
Identifier Behavior Example
For more information about configuring the Media Type Checking and
Return Media Identifier settings, see Creating Partitions Manually on
page 136.
Creating Partitions
You can create library partitions in three ways:
• Creating Partitions Automatically on page 135
• Creating Partitions Manually on page 136, using one of the
following modes:
• Using Simple Mode on page 136
• Using Expert Mode on page 141
The method you should choose depends on the circumstance and the
level of control you want in allocating resources to the partition. When
creating partitions
Automatically
, the library assigns available system
resources to create the number of partitions you specify. Automatic
mode is not available if a partition already exists. Creating partitions
Manually
enables you to pick specific drives, storage magazines, and
magazines within an I/E station to assign to a partition.
Note: Make sure that you have adequately planned for the number of
partitions that you want to configure.
Setting
Volume Serial Number Returned to
Host*
Disabled ABC123
Prefix L1 ABC123
Suffix ABC123 L1
Pass Through ABC123 L1
*Based on actual LTO-1 barcode: ABC123 L1