SCSI Commands: 21BLOG SENSE
Page
71
Flag
Condition Setting Flag
Condition
Clearing Flag
Flag Name
22
Cleaning tape cartridge out of
cleaning tape
Successful clean
cycle
Expired cleaning
media
23
Cleaning tape MIC: page bad; not
supported; not recognized
Media removal
Invalid cleaning
tape
26
Detected cooling fan failure
Power cycle
Cooling fan failure
30 SEND
DIAGNOSTIC
command
failure
Tape eject
and
drive
reset
Hardware A
31
POST failure; internal HW
failure; HW error; message
timeout; deadman timeout;
snapped tape
Power cycle of drive
Hardware B
32
Any unrecovered interface error
None
Interface
34
Any failure to complete
microcode update
Successful microcode
update
Download fail
36 Detection
of
temperature
exceeding specification.
(LTO3HH and LTO4HH only)
Detection of
temperature within
specification
Drive Temperature
37
Detection of out of band voltage
Detect voltage in
band
Drive voltage
51
Unloading media and tape
directory corrupted detected
Media removal
Tape directory
invalid at unload
55
Media loaded has: tape
manufacture mismatch; cartridge
type mismatch; format type
mismatch; cartridge not
supported
Media removal
Loading failure
56
Tape unloading error
Media removal
Unrecoverable
unload failure
59
WORM media loaded and any
WORM media indicators or
requirements do not conform to
LTO WORM media standards
Media removal
WORM medium
integrity check
failed
60
WORM media loaded, drive
ready, tape position is at existing
data and one of the following
commands received:
1. WRITE
2. WRITE FILEMARK
3. ERASE
4. SET CAPACITY
Media removal
WORM medium
overwrite attempted
3.9.13.2.1
Media Error to TapeAlert Correlation
Содержание LTO 4
Страница 1: ......