Quantum LTO 4, Руководство пользователя

Страница: 226 / 297

SCSI Commands: 51BWRITE Page 218
is encountered. Any WRITE command issued within Early Warning and successfully
completed finishes with a Check Condition and the EOM bit set.
3.39.2 WRITE Completion Status
Code Message Description
00h Good
Status
•
The SCSI data has been transferred to the data buffer.
•
The drive remains in any previously set mode.
02h Check
Condition Use the REQUEST SENSE command to retrieve status information. Possible
Sense Keys are:
Code Message Description
02h Not Ready No cartridge is in the drive.
03h Media Error Unrecoverable data error encountered.
04h Hardware Error Parity error on the SCSI bus or drive hardware
failure.
05h Illegal Request The Command Descriptor Block is invalid.
06h Unit Attention The cartridge was changed, or the drive was reset
prior to this command.
07h Write Protect The tape is write-protected; check the cartridge
before continuing.
0Dh Volume Overflow The WRITE command completed with data in the
buffer because the end-of-partition was
encountered.