SRV_STEP_THREAD_TAPE_ERROR14 275h
Servo
expecting
MECH_DELAY2_DONE
SRV_STEP_THREAD_TAPE_ERROR15 276h
Servo
Load
arm stalled pulling pin from cartridge
SRV_STEP_THREAD_TAPE_ERROR16 277h
Servo
While
removing
the hysteresis from the load arm (hooking the
pin) the bi-cell va
SRV_STEP_THREAD_TAPE_ERROR17
278h
Servo
The load arm failed to grab the pin to thread the tape and all of
the retries we
SRV_STEP_THREAD_TAPE_ERROR18
279h
Servo
All retries for pulling tape from the cartridge were used up
SRV_STEP_THREAD_TAPE_ERROR19 27Ah
Servo
expecting
SNS7
SRV_STEP_PWR_RECOVERY_LOAD_CART_ERROR5
27Bh
Servo
expecting steps done
SRV_STEP_PWR_RECOVERY_LOAD_CART_EXPECT
ED_TRAY_OUT
27Ch
Servo
expecting SNS2 low
SRV_STEP_THREAD_TAPE_ERROR22
27Dh
Servo
Load arm motor stalled while finishing a thread operation
SRV_STEP_THREAD_TAPE_ERROR23 27Eh
Servo
Cartridge
reel motor did not move as much as expected.
SRV_STEP_THREAD_TAPE_DEFAULT
27Fh
Servo
An unexpected state occurred in the tape thread task.
SRV_STEP_PWR_RECOVERY_LOAD_CART_ERROR7
280h
Servo
expecting steps done
SRV_STEP_UNTHREAD_TAPE_ERROR2 281h
Servo
motor
stall
SRV_STEP_PWR_RECOVERY_LOAD_CART_ERROR8 282h
Servo
expecting
eerpom
done
SRV_STEP_PWR_RECOVERY_LOAD_CART_DEFAUL
T
283h
Servo
invalid state in srv_dcl_loadCartridgePoweronRecovery function
SRV_STEP_UNTHREAD_TAPE_ERROR6 284h
Servo
Load arm stalled while leaving the hub
SRV_STEP_UNTHREAD_TAPE_ERROR7
285h
Servo
expecting steps done
SRV_STEP_LOAD_CART_ERROR5
286h
Servo
expecting serial eeprom done
SRV_STEP_PWR_RECOVERY_THREAD_TAPE_ERRO
R10
287h
Servo
expecting SNS13 high
SRV_STEP_UNTHREAD_TAPE_ERROR10 288h
Servo
35motor
stall
waiting
SRV_STEP_UNTHREAD_TAPE_ERROR11
289h
Servo
expecting steps done
SRV_STEP_UNTHREAD_TAPE_ERROR12
28Ah
Servo
SNS13 Did not change to expected value
SRV_STEP_UNTHREAD_TAPE_ERROR13
28Bh
Servo
expecting steps done
SRV_STEP_UNTHREAD_TAPE_ERROR14 28Ch
Servo
Removing
tape slack from the cartridge failed during Unthread
SRV_STEP_UNTHREAD_TAPE_ERROR15 28Dh
Servo
failed to release pin
SRV_STEP_UNTHREAD_TAPE_ERROR16 28Eh
Servo
motor stall waiting for HALT4
SRV_STEP_UNTHREAD_TAPE_ERROR17
28Fh Servo Unexpected
id
SRV_STEP_UNTHREAD_TAPE_DEFAULT
290h
Servo
An unexpected state occurred in the tape unthread task.
SRV_STEP_MOTOR_ERROR1
291h
Servo
expecting steps done
SRV_STEP_STEP_MOTOR_DEFAULT
292h
Servo
An in unexpected state occurred in the move motor task.
SRV_STEP_HEAD_INVALID_WRAP 293h
Servo
invalid
wrap
value
SRV_STEP_HEAD_EXPECTING_STOP_AFTER_MOVIN
G_TO_POSITION
294h Servo expecting
HALT1
SRV_STEP_HEAD_EXPECTING_STOP_AFTER_ADDE
D_HYSTERESIS
295h
Servo
expecting steps done
SRV_STEP_HEAD_EXPECTING_TOP_SENSOR_HIGH 296h
Servo
expecting
SNS9
high
SRV_STEP_HEAD_EXPECTING_STOP_AFTER_TOP_S
ENSOR_HIGH
297h Servo expecting
HALT2
SRV_STEP_HEAD_EXPECTING_TOP_SENSOR_LOW
298h
Servo
expecting SNS9 low
SRV_STEP_HEAD_EXPECTING_STOP_AFTER_TOP_S
ENSOR_LOW
299h Servo expecting
HALT3
SRV_STEP_HEAD_STEP_DEFAULT
29Ah
Servo
An unexpected state occurred in the head step task.
SRV_STEP_STEP_DEFAULT
29Bh
Servo
An unexpected state occurred in the step motor task.
SRV_STEP_SETUP_MOTOR_CONTROL_DEFAULT 29Ch Servo An
unexpected state occurred in the cartridge load task
SRV_STEP_RETRY_THREAD_TAPE_ERROR1 29Dh
Servo
expecting
HALT1
SRV_STEP_RETRY_THREAD_TAPE_ERROR2
29Eh
Servo
expecting SNS13 low
SRV_STEP_RETRY_THREAD_TAPE_ERROR3
29Fh
Servo
expecting steps done
SRV_STEP_RETRY_THREAD_TAPE_DEFAULT
2A0h
Servo
An unexpected state occurred in the cartridge load task.
SRV_STEP_PWR_RECOVERY_THREAD_TAPE_ERRO
R11
2A1h
Servo
motor stall waiting for ENGAGED_LEADER
SRV_STEP_PWR_RECOVERY_THREAD_TAPE_ERRO
R12
2A2h
Servo
expecting steps done
SRV_STEP_PWR_RECOVERY_THREAD_TAPE_DEFA
ULT
2A3h
Servo
An unexpected state occurred in the power on recovery task.
SRV_STEP_GOFROM_HUB_TOPARK_ERROR1
2A4h
Servo
expecting steps done
Содержание LTO 4
Страница 1: ......