Quantum LTO 4, Руководство пользователя

Страница: 186 / 297

SCSI Commands: 40BREQUEST SENSE Page 178
Sense
Key
Byte 2
ASC
Byte 12
ASCQ
Byte 13
Message
Explanation
07h 74h 02h Unencrypted data found
while decrypting Unencrypted block detected while
reading or verifying in Decrypt or
RAW mode.
07h 74h 03h Incorrect data encryption
key No valid decryption key available for
encrypted data block encountered
while reading or verifying the
current media.
08h Blank Check
08h 00h 05h End-of-medium detected A READ or a SPACE command
terminated early because End of
Data was encountered.
08h 14h 03h End-of-data not found A Read type operation failed
because a format violation related
to a missing end-of-data data set
09h Vendor Unique
09h 00 05 VS End-of-data detected Raw reader.
09h 80 80 VS Medium is present PARK UNPARK command.
0Bh Aborted Command
0Bh 08h 00h Logical unit
communications failure Unable to communicate with logical
unit.
0Bh 08h 01h
Logical unit
communication time out Internal task communication timed
out.
0Bh 1Bh 00h Synchronous data transfer
error Data transfer error on parallel SCSI.
0Bh 3Dh 00h Invalid bits in identify
message An illegal Identify message has
been received by the drive at the
start of a command.
0Bh 43h 00h Message error A message could not be sent or
received due to excessive trans-
mission errors.
0Bh 45h 00h Select or reselect failure An attempt to reselect an initiator in
order to complete the command has
failed.
0Bh 47h 00h SCSI parity error Parity error on parallel SCSI.
0Bh 48h 00h Initiator detected error
message received A command failed because an
Initiator Detected Error message
was received.
0Bh 49h 00h Invalid message error The command failed because an
invalid message was received by
the drive.
0Bh 4Ah 00h Command phase error
A command could not be executed
because too many errors occurred
in the Command phase.
0Bh 4Bh 00h Data phase error A command could not be completed
because too many errors occurred
during the Data phase.
0Bh 4Dh NNh Tagged overlapped
commands (NN = Queue
Tag) An initiator sent the drive a new
command although the initiator had
a command with the same Task ID
outstanding in the drive.
0Bh 4Eh 00h Overlapped commands
attempted An initiator selected the drive
although the initiator had a com-
mand outstanding in the drive.