SCSI Commands: 40BREQUEST SENSE
Page
175
Sense
Key
Byte 2
ASC
Byte 12
ASCQ
Byte 13
Message
Explanation
03h 30h
00h
Incompatible medium
installed
Inserted cartridge is incompatible,
cleaning tape or other.
03h 30h
02h
Cannot read medium
incompatible format
An operation could not be
completed because the Logical
Format is not correct.
03h 30h
07h
Cleaning
failure
Cleaning tape exhausted, bad, or
attempt to use cleaning tape as a
data tape.
03h 30h
0Dh
WORM medium integrity
check
Integrity of WORM medium has
been compromised.
03h
30h
80h
Firmware tape fail
Media error reading firmware tape.
03h
31h
00h
Medium format corrupted
Data could not be read because the
format on tape is not valid, but is a
known format.
03h 3Bh
00h
Sequential positioning
error
A command has failed and left the
logical position at an unexpected
location.
03h 3Bh
08h
Reposition
error
Position lost during Locate or
Reposition command.
03h
50h
00h
Write append error
A Write type command failed
because the data append point was
unreadable.
03h 50h
01h
Write append position
error
Unable to locate the append point
for the write data.
03h
51h
00h
Erase failure
Unable to erase due to media fault.
03h 52h
00h
Cartridge
fault
A command could not be completed
due to a fault in the tape cartridge
03h
53h
00h
Media load or eject failed
An attempt to load or eject the tape
failed due to a problem with the
tape.
03h
53h
01h
Unload tape failure
Unable to unload tape due to
cartridge or tape problem.
04h Hardware Error
04h 40h
80h
SCSI Task diagnostic
failed
During POST or diagnostics the
SCSI Task reported an error. Refer
to the VSCQ for more information
about the cause.
04h 40h
81h
DSM Task diagnostic
failed
During POST or diagnostics the
DSM Task reported an error. Refer
to the VSCQ for more information
about the cause.
04h 40h
82h
ECC Task diagnostic
failed
During POST or diagnostics the
ECC Task reported an error. Refer
to the VSCQ for more information
about the cause.
04h 40h
83h
TAPE Task diagnostic
failed
During POST or diagnostics the
TAPE Task reported an error. Refer
to the VSCQ for more information
about the cause.
04h
40h
84h
MIC Task diagnostic failed
During POST or diagnostics the
MIC Task reported an error. Refer
to the VSCQ for more information
about the cause.
Содержание LTO 4
Страница 1: ......