SCSI Commands: 16BERASE
Page
28
3.4.2
ERASE Completion Status
Code Message
Description
00h Good
Status
•
The drive remains in any previously set modes.
•
The drive is ready to perform any appropriate command.
Note: If IMMED is one, then Good Status only indicates that the command is
valid.
02h Check
Condition
Use the REQUEST SENSE command to retrieve status information.
Possible Sense Keys are:
Code Message
Description
02h
Not Ready
No cartridge is in the drive.
03h
Media Error
Unrecoverable data error encountered.
04h
Hardware Error
Parity error on the SCSI bus or drive hardware
failure detected.
05h
Illegal Request
The Command Descriptor Block is invalid.
06h
Unit Attention
The cartridge was changed or the drive was
reset prior to this command.
07h
Write Protect
The cartridge is write protected.
Содержание LTO 4
Страница 1: ......