QUANTA QSSC-S99K 2U, Руководство пользователя

Страница: 78 / 177

Session and User
The BMC must support at least 10 users (including null username). The supporting of anonymous login and null-username
must be configurable. Note: Most special characters could be used, but there are still restrictions in following list:
1. Symbol “/” is not allowed to use as username.
2. Username is not allowed to use only one symbol “!”
3.
Symbol “+” and “-“is not allowed to be the first character of username.
Default User Table
ID Name Password Privilege Status
1 Null Null User Disabled
2 “root” “root” Administrator Enabled
RMCP+
Besides RMCP defined by DMTF, AST2050 also supports RMCP+ protocol defined in IPMI 2.0.

Authentication Algorithm types supported: RAKP-none, RAKP-HMAC-SHA1.

Integrity Algorithm types supported: none, HMAC-SHA1-96.

Confidentiality Algorithm types supported: none, AES-CBC-128, xRC4-128, xRC4-40.

Session Support: 4
NMI
The system support NMI assertion, there are three possible NMI assertion sources, Chassis Control command, PEF action,
and Watchdog timer pre-interrupt. The NMI pulse duration is 10ms. It is not available at BIOS POST period. If NMI was
triggered by BMC, BMC will log a Critical Interrupt Event for this assertion.
Serial Over LAN
BMC supports 1 SOL session specific in IPMI Spec v2.0. BMC supports redirect data from UART interface, the data from
UART will be packed and then transfer to the NIC interface.
Channel Number Assignment
This BMC follows channel number assignment defined in IPMI standard:
Channel Number Type/Protocol Medium
00h IPMB-1.0 I2C
01h IPMB-1.0 LAN
0Fh KCS Host interface
Chapter 4 — BMC
70