QUANTA QSSC-S99K 2U Скачать руководство пользователя

Страница: 135 / 177

Note:

To change any of the settings on the Network Configuration page, you must have permission to configure BMC. Don’t

do network configure when the server is in BIOS mode; the network configuration may be conflict with BIOS.

Items Description

MAC Address

Displays the MAC address.

Obtain an IP address

automatically

This option allows the IP to be configured by a DHCP server (dynamically).

Use the following IP

address

This option allows you to configure the IP address with a static IP. The IP Address, Subnet Mask,

Default Gateway will become editable when this option is selected.

IP Address

Setup the IP address.

Subnet Mask

Setup the Subnet Mask

Default Gateway

Setup the gateway access address of the BMC.

Items Description

Obtain DNS IP address

automatically

This option allows the DNS IP to be configured by a DHCP server (dynamically).

Use the following DNS IP

address

This option allows you to configure the DNS IP address with a static IP. The Primary and

Secondary DNS Server will become editable when this option is selected.

Primary DNS Server

Specify the IP address of the preferred DNS server.

Secondary DNS Server

Specify the alternative IP address to be used when the preferred DNS server is not available.

Note:

If you configure the IP address with a static IP, you can’t get the DNS IP address from DHCP server.

Items Description

Enable DNS Register

BMC Host Name

When checked, it will register with the Domain Name Server. DNS BMC Host Name field will

become read-only when this option is selected.

DNS BMC Host Name

Specifies the DNS BMC host name.

Load Default Host

Press this button to load default DNS BMC Host Name, the format is “bmc-[MAC Address]”.

Enable DNS Domain

Name(use DHCP)

Enable / disable acquisition of DNS Domain Name from DHCP server. DNS Domain Name field

will become read-only when this option is selected.

DNS Domain Name

Specified the DNS domain name.

Note:

If you want to update the DNS information with the DNS server, you must select “Obtain an IP address automatically”

to get the IP address dynamically. The DNS server IP will be provided by the DHCP server.

Chapter 5 — ESMS

127

Содержание QSSC-S99K 2U


















































































































































































Результаты поиска

Содержание QSSC-S99K 2U

Отзывы:

Похожие инструкции для QSSC-S99K 2U

Бренды по названию

Популярные бренды

QUANTA QSSC-S99K 2U, Руководство пользователя

Результаты поиска

Содержание QSSC-S99K 2U

Отзывы:

Похожие инструкции для QSSC-S99K 2U

Бренды по названию

Популярные бренды