QMS ColorScript 310, Руководство пользователя

Страница: 23 / 196

Setting the Printer Voltage Switch
7
Setting the Printer Voltage Switch
Before turning the printer on for the first time, confirm that the
voltage switch setting matches the electrical current within your
facility. Your ColorScript 310/330 printer voltage switch should
already be set to the correct voltage for your country. See
Table 1-1 to determine the correct voltage setting for your
country.
The voltage switch is recessed into the printer’s rear cover,
directly above the AC power receptacle. If you need to change
the voltage settings, use a flat-bladed screwdriver to flip the
switch to the left for 100 - 120 Volts AC, or to the right for 220 -
240 Volts AC. You may need a strong light or flashlight to read
the numbers printed on the printer voltage switch.
Figure 1-5 Setting the Printer Voltage Switch
Table 1-1 Voltage Settings in Selected Countries
Country Voltage Setting Country Voltage Setting
Europe 220-240 Volts AC United States 100-120 Volts AC