Qlogic Storage Networking (Unified Fabric Pilot), Руководство по установке

Страница: 33 / 76

5–Validation Methods for DCB and FCoE
Validation Step 1—Verify PFC and ETS Parameters
51031-00 A 5-3

pfc_enable value is the same for the adapter, switch, and targets.

Application type-length-value (TLV) contains one entry for FCoE
protocol and one entry for FCoE initialization protocol (FIP). The
user_priority_map should be the same for the adapter, switch,
and targets.

Priority group TLV for the switch contains the ETS bandwidth
allocation configured at the switch console.

If IEEE DCBX version 1.4 or later is used, then verify the following:

Converged Network Adapter and Target Willing bit (W) is ON,
while the Switch W bit is OFF.

pfc_enable value is the same for the adapter, switch, and targets.

Application TLV contains one entry for FCoE protocol and one
entry for FIP. The user_priority_map should be the same for the
adapter, switch, and targets.

ETS Recommendation TLV for the switch contains the bandwidth
allocation per priority as configured on the switch console.

ETS Configuration TLV for the adapter and target contain the
same bandwidth allocation per priority as the switch.