Qlogic Storage Networking (Unified Fabric Pilot), Руководство по установке

Страница: 50 / 76

5–Validation Methods for DCB and FCoE
Validation Step 5—ETS Verification
5-20 51031-00 A
7. Use Expert to analyze the capture, and verify the following:

No error occurs on FCoE traffic

Link throughput per priority in MBps ( Figure 5-20 )

Each traffic class can still generate I/O at its ETS setting when the link
is saturated.

Exchange completion time
Figure 5-20. Throughput per Priority
Validation Results
Table 5-3 lists the port settings to verify the ETS setup. ETS allocates 50 percent
of the bandwidth to FCoE and 50 percent of the bandwidth to other traffic. The
other traffic is regular TCP traffic.
Table 5-3. Analyzer Port Setup Reference for Monitoring Links
Ports Direction Description
Storage (1,1,1) Storage > Switch FCoE storage read data
Switch (1,1,2) Switch > Storage FCoE storage write data
Server (1,2,1) Server > Switch Server I/O out (write)
Switch (1,2,2) Switch > Server Server I/O in (read)