Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 99 / 184

5 – Non-Interactive Mode Commands
Non-interactive Commands
SN0054621-00 E 5-15
A
The following shows an example of how the HBA port information might appear:
0. HBA 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050C
HBA Serial Number: FS20525B03135
FW Version: 2.2.4.45 Type: Copper
IP Address: 192.168.3.7
Alias:
iSCSI name: iqn.2000-04.com.qlogic.fs10506a02810.1
1. HBA 1 Port: 0 HBA Port Instance: 1 HBA Model: QLA4062C
HBA Serial Number: AS40637A04673
FW Version: 3.0.1.18 Type: Copper
IP Address: 192.168.3.22
Alias:
iSCSI name: iqn.2000-04.com.qlogic.as10506a02810.1
2. HBA 1 Port: 1 HBA Port Instance: 2 HBA Model: QLA4062C
HBA Serial Number: AS40637A04673
FW Version: 3.0.1.18 Type: Copper
IP Address: 192.168.3.38
Alias:
iSCSI name: iqn.2000-04.com.qlogic.as10506a02810.1
3. HBA 2 Port: 0 HBA Port Instance: 3 HBA Model: QLA4010
HBA Serial Number: FS20407B03135
FW Version: 3.0.1.17 Type: Copper
IP Address: 192.168.3.72
Alias:
iSCSI name: iqn.1991-05.com.microsoft.steinway.qlogic.org
For information on the interactive version of this command, see “List All QLogic
iSCSI HBA Ports Detected (CLI Option -i)” on page 4-48 .
-import
(Import HBA Configuration)
To import an HBA configuration from a file (see “-save (Save Host Configuration)”
on page 5-28 ), enter the
-import
command as follows:
-import < hba_no_target > < hba_no_Source > [A] [F N I T C B] < File
Name >
Where:
< hba_port_inst >
= The specific HBA to which the data is written
<
hba_port_inst_
source
>
= The file with the HBA configuration you want.
A
= Configure all imported parameters (F, N, I, T, C, B).
F
= Configure the firmware.
N
= Configure the network parameters.