Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 95 / 184

5 – Non-Interactive Mode Commands
Non-interactive Commands
SN0054621-00 E 5-11
A
-dtrema
(Remove Discovered Target)
To remove all non-persistent discovered targets, enter the
-dtrema
command as
follows:
-dtrema < hba_port_inst >
For information on the interactive version of this command, “Remove Discovered
Target” on page 4-46 .
-dumpcore
(Retrieve FW Coredump Record)
To dump the RAM memory to a file name of your choice, enter the
-dumpcore
command as follows:
-dumpcore < hba_port_inst > [ File name ]
For information on the interactive version of this command, see “Retrieve FW
Coredump Record (CLI Option -dumpcore)” on page 4-16 .
-dumpnvram
(Retrieve FW Flash & NVRAM Record)
To dump the NVRAM to a file name of your choice, enter the
-dumpnvram
command as follows:
-dumpnvram < hba_port_inst > [ File name ]
For information on the interactive version of this command, “Retrieve FW Flash &
NVRAM Record (CLI Option -dumpnvram)” on page 4-15 .
-dv
To see the version of the iSCSI HBA driver(s) installed, enter the
-dv
command
as follows.
-dv
There is no corresponding command in the interactive menu; however, you can
use this interactive option to view the current driver version:
“Install HBA Driver, All
Adapters (CLI Option -d)” on page 4-11 .
-edchap
(Edit a CHAP Entry)
To change the value of the specified CHAP entry, enter the
-edchap
command
as follows:
-edchap <hba_port_inst> <CHAP> < Parameter > | < Parameter Alias >
< Value > [< Parameter > | < Parameter Alias > < Value >
…
]