Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 79 / 184

4 – Interactive Mode Commands
Port Level Info & Operations Menu
SN0054621-00 E 4-45
A
Select the Target Discovery Menu option to view the HBA Target Discovery
Menu containing the following options:
1. Display Send Targets
(see page 4-45 )
2. Display Discovered Targets
(see page 4-45 )
3. Add a Send Target
(see page 4-45 )
4. Mark Send Target for re-discovery
(see page 4-45 )
5. Remove a Send Target
(see page 4-46 )
6. Login and persist a discovered target
(see page 4-46 )
7. Duplicate a Persistent Target
(see page 4-46 )
8. Duplicate a Discovered Target
(see page 4-46 )
9. Remove Discovered Target
(see page 4-46 )
10. Display iSNS Settings
(see page 4-46 )
11. Configure iSNS
(see page 4-46 )
12. Save changes and reset HBA (if necessary)
(see page 4-18 )
13. Select HBA Port
(see page 4-49 )
14. Refresh
(see page 4-49 )
15. Exit
(see page 4-50 )
Display Send Targets
Select the Display Send Targets option to view a list of send targets in the
SANsurfer iSCSI HBA CLI database, as well as the persistent send targets in the
HBA database.
Display Discovered Targets
Select the Display Discovered Targets option to view a list of discovered targets
in the SANsurfer iSCSI HBA CLI database.
Add a Send Target
Select the Add a Send Target option to add a new send target to either the
SANsurfer iSCSI HBA CLI database or the HBA database. You must save your
changes before send targets are discovered. When you are prompted to make the
target persistent, respond
yes
to add the target to the HBA database and log in
the targets. For the added target to be discovered, you must use the Save
Target/CHAP Settings option (see page 4-47 ).
Mark Send Target for Re-discovery
Select the Mark Send Target for Re-discovery option to have SANsurfer iSCSI
HBA CLI discover send targets when you select the Save Target/CHAP Settings
option (see page 4-47 ).