Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 109 / 184

5 – Non-Interactive Mode Commands
Non-interactive Commands
SN0054621-00 E 5-25
A
-ping
(Ping Target)
To ping the target device specified IP address, enter the
-ping
command as
follows:
-ping < hba_port_inst > < IP Address > < Ping Count > < Packet size >
< IPv6 source address >
The following provides the
IPv6 source address
values:
Where:
For information on the interactive version of this command, see “Ping Target (CLI
Option -ping)” on page 4-30 .
-ps
To view persistent targets for the HBA port, enter the
-ps
command as follows:
-ps <hba_port_inst> [ Target ID ]
If you do not specify the
[ Target ID ]
, SANsurfer iSCSI HBA CLI displays all
targets for the specified HBA port number. If you do not specify the port instance
[ hba_port_inst ]
nor the Target ID,
[ Target ID ]
, SANsurfer iSCSI HBA CLI
displays all target IDs for all HBA ports in the system.
There is no interactive command for this function.
-pu
To unbind a persistent target, enter the
-pu
command as follows:
-pu <hba_port_inst> < Target ID >
0 = Do Not Care
1 = Local Link
2 = Address 0
3 = Address 1
hba_port_inst
= The HBA port that sends the ping.
IP Address
= The IP address to pin.
Ping Count
= The number of ping packets you want (1–[2^31]).
Packet Size
= The size of the ping packet 0-64kB
IPv6 Source
Address
= Origin device