Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 51 / 184

4 – Interactive Mode Commands
HBA Level Info & Operations Menu (CLI Option -i)
SN0054621-00 E 4-17
A
MACRxLengthErrorCountLarge : 0
MACRxLengthErrorCountSmall : 0
MACRxMulticast : 402
MACRxBroadcast : 177
HBA Level Parameters Menu
(No CLI Option)
To make changes to the HBA level parameters:
1. Specify the HBA port whose settings you want to view or change by typing
the number for
Select HBA Port , and then press
ENTER
.
SANsurfer iSCSI HBA CLI lists all iSCSI HBA ports.
2. Type the number for the HBA port whose settings you want to change, and
then press
ENTER
.
3. Make changes in the submenus, as described in the following sections:
1. Display HBA Level Parameters
(see page 4-17 )
2. Configure HBA Level Parameters
(see page 4-18 )
3. Select HBA Port
(see page 4-49 )
4. Save changes and reset HBA
(see page 4-17 )
5. Refresh
(see page 4-49 )
6. Exit
(see page 4-50 )
4. For each submenu, save the changes by typing the number for the Save
changes and reset HBA option, and then press
ENTER
. This saves your
changes and resets all ports on the HBA.
5. To update the firmware with these changes, type the number for Refresh ,
and then press
ENTER
. If you do not select this option, your changes will not
be visible in SANsurfer iSCSI HBA CLI.
Display HBA Level Parameters
(CLI Option -i)
Select the Display HBA Level Parameters option to view information about the
HBA. For example:
HBA_Alias : hba3
HBA_TCP_Max_Window_Size : 32768
HBA_Default_Fragment_Reass_Timeout : 40
NOTE:
The parameters available vary with the type of HBA.