Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 77 / 184

4 – Interactive Mode Commands
Port Level Info & Operations Menu
SN0054621-00 E 4-43
A
Add a Default BIDI CHAP
(CLI Option -defbidi)
A default bidirectional (BIDI) CHAP causes the HBA to authenticate only the
CHAP secrets of all targets with CHAP (the CHAP names are ignored). In
addition, the CHAP names of any bidirectional CHAP entries are ignored.
To add a default BIDI CHAP:
1. On the HBA CHAP Menu , type
5
( Add a Default BIDI CHAP ), and then
press
ENTER
.
2. At the
CHAPSecret [default secret]
prompt, do one of the following:
‰ Type the name of an existing CHAP secret you want to use, and then
press
ENTER
.
‰ To use the default secret displayed in the prompt, press
ENTER
.
3. At the
Press the Enter key to continue
prompt, press
ENTER
.
You can add a BIDI CHAP entry with the -defbibi command. See “-defbidi (Add a
Default BIDI CHAP)” on page 5-7 .
Edit a CHAP Entry
(CLI Option -edchap)
To edit a CHAP entry:
1. On the HBA CHAP Menu , type
6
( Edit a CHAP entry ), and then press
ENTER
.
The CHAP table is displayed.
2. Press
ENTER
.
3. At the prompt, type the number of the CHAP entry you want to change, and
then press
ENTER
.
4. At the
CHAPName [ default name ]
prompt, do one of the following:
‰ Type a new CHAP name, and then press
ENTER
.
‰ To use the default CHAP name shown in the prompt, press
ENTER
.
5. At the
CHAPSecret [ default name ]
prompt, do one of the following:
‰ Type a new CHAP secret, and then press
ENTER
.
‰ To use the default CHAP secret shown in the prompt, and then press
ENTER
.
6. At the
CHAPBidi [off
or
on]
prompt, do one of the following:
‰ If you want the HBA to authenticate the target (bidirectional CHAP)
and the prompt is
CHAPBidi [off]
, type
on
, and then press
ENTER
.
If the prompt is
CHAPBidi [on]
, press
ENTER
.