Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 108 / 184

5 – Non-Interactive Mode Commands
Non-interactive Commands
5-24 SN0054621-00 E
S
-pad
To view all targets for a port, enter the
-pad
commands as follows:
-pad < hba_port_inst >
-pb
(Bind Target)
Enter the
-pb
command to bind a target (make it persistent):
-pb <hba_port_inst> < Target ID >
For information on the interactive version of this command, see “Bind Target (CLI
Option -pb)” on page 4-39 .
-pbootcode
(Set Primary Boot Target Information)
To set the primary bootcode boot target and LUN, enter the
-pbootcode
command as follows:
-pbootcode <hba_port_inst> < tgt > < lun >
This command is not active for the PPC.
For information on the interactive version of this command see “Set Primary Boot
Target Information (CLI Option -pbootcode)” on page 4-35 .
For information on secondary boot code, see “-sbootcode (Set Secondary Boot
Target Information)” on page 5-29 .
-pdt
To disable a target, enter the
-pdt
command as follows:
-pdt < hba_port_inst > < targetId >
-pet
To enable a target, enter the
-pet
command as follows:
-pet < hba_port_inst > < targetId >
-pinfo
(Port Information)
To view port information for the specified HBA, enter the
-pinfo
command as
follows:
-pinfo <hba_port_inst>
For information on the interactive version of this command see “Port Link Settings
Menu” on page 4-19 .