Qlogic SANsurfer iSCSI HBA CLI, Руководство пользователя

Страница: 38 / 184

4 – Interactive Mode Commands
4-4 SN0054621-00 E
S
2. Port Network Settings Menu (see page 4-20 )
1. Display Network Settings (see page 4-20 )
2. Configure IP Settings (see page 4-21 )
3. iSNS Settings (see page 4-21 )
4. Select HBA Port (see page 4-49 )
5. Save Changes and Reset HBA (see page 4-18 )
6. Refresh (see page 4-49 )
7. Exit (see page 4-50 )
3. Edit Configured Port Settings Menu (see page 4-22 )
1. Display Configured Port Settings (see page 4-22 )
2. Change Port iSCSI Alias Name (see page 4-22 )
3. Port Firmware Settings Men
u
(see page 4-23 )
1. Display Configured Port Settings (see page 4-23 )
2. Edit a Specific Port Setting (see page 4-24 )
3. Configure iSCSI Settings (see page 4-24 )
4. Configure Firmware Settings (see page 4-25 )
5. Configure Device Settings (see page 4-25 )
6. Configure Basic Settings (see page 4-26 )
7. Configure Advanced Settings (see page 4-26 )
8. Configure IPv6 Settings (see page 4-27 )
9. Configure IPv6 TCP Settings (see page 4-28 )
10. Save Changes and Reset HBA (see page 4-18 )
11. Select HBA Port (see page 4-49 )
12. Refresh (see page 4-49 )
13. Exit (see page 4-50 )
4. Legacy QLA4010 Restore Default Port Settings (see page 4-28 )
5. Select HBA Port (see page 4-49 )
6. Save Changes and Reset HBA (if necessary) (see page 4-18 )
7. Refresh (see page 4-49 )
8. Exit (see page 4-50 )
4. Port Restore Factory Defaults
(see page 4-28 )
Table 4-1. Command Line Interface Menu (Continued)
Level 1 Level 2 Level 3 Level 4