PURSUIT 3070 EXPRESS, Руководство пользователя

Страница: 45 / 167

3070 OFFSHORE
45
Macerator- Head
Supplies electrical current to the switch that controls the macerator overboard discharge pump for
the holding tank. This breaker should be in the “OFF” position except when pumping out the
holding tank.
Carbon Monoxide Detector
Supplies 12-volt electrical current to the carbon monoxide detector in the cabin. This is a "push
to reset" breaker that is normally on all the time, when activated by the house battery switch on the
TABS, unless it is tripped by an overload. It should be checked, and the power indicator on the
carbon monoxide detector should be lit whenever someone is occupying the cabin. If the breaker
has tripped, it indicates that there is a problem with the carbon monoxide detector, the breaker, or
the wiring from the breaker panel to the detector. Always determine the cause of the problem and
correct it before resetting the breaker.
CARBON MONOXIDE IS A LETHAL, TOXIC GAS THAT IS COLORLESS AND
ODORLESS. IT IS A DANGEROUS GAS THAT WILL CAUSE DEATH IN CER-
TAIN LEVELS.
Accent Lighting
Supplies 12-volt electrical current to the accent lights in the cabin. This is a "push to reset" breaker
that is normally on all the time, when activated by the house battery switch on the TABS, unless
tripped by an overload.
Rod Locker Lighting
Supplies 12-volt electrical current to the lights in the rod locker. This is a "push to reset" breaker
that is normally on all the time, when activated by the house battery switch on the TABS, unless
tripped by an overload.
Accessory Reserved for additional 12-volt equipment.
Additional Breakers and Switches
Windlass
The windlass breaker is located on the TABS unit which is located in the stern bilge. This is a "push
to reset" breaker that is normally on all the time, when activated by the house battery switch on the
TABS, unless tripped by an overload.
Forward Bilge
The forward bilge pump breaker is located on the TABS and provides protection for the automatic
float switch on the forward bilge pump. This "push to reset" breaker is always supplied current
when the batteries are connected. Another breaker in the helm provides circuit protection for the
manual switch.