Mercury 200 Optimax Скачать руководство пользователя

Страница: 1 / 155

eng

Thank You

for your purchase of one of the finest outboards available.

You have made a sound investment in boating pleasure.

Your outboard has been manufactured by Mercury Marine, a

world leader in marine technology and outboard

manufacturing since 1939. These years of experience have

been committed to the goal of producing the finest quality

products. This led to Mercury Marine's reputation for strict

quality control, excellence, durability, lasting performance,

and being the best at providing after the sale support.
Please read this manual carefully before operating your

outboard. This manual has been prepared to assist you in

the operation, safe use, and care of your outboard.
All of us at Mercury Marine took pride in building your

outboard and wish you many years of happy and safe

boating.
Again, thank you for your confidence in Mercury Marine.

EPA Emissions Regulations

Outboards sold by Mercury Marine in the United States are

certified to the United States Environmental Protection

Agency as conforming to the requirements of the regulations

for the control of air pollution from new outboard motors.

This certification is contingent on certain adjustments being

set to factory standards. For this reason, the factory

procedure for servicing the product must be strictly followed

and, wherever practicable, returned to the original intent of

the design.

Maintenance, replacement, or repair of the

emission control devices and systems may be
performed by any marine engine repair establishment or
individual.

Engines are labeled with an Emission Control Information

decal as permanent evidence of EPA certification.

WARNING

The engine exhaust from this product contains chemicals

known to the state of California to cause cancer, birth

defects or other reproductive harm.

200/225/250 Pro XS OptiMax

90-8M0050073 710

Содержание 200 Optimax




























































































































































Результаты поиска

Содержание 200 Optimax

Отзывы:

Похожие инструкции для 200 Optimax

Бренды по названию

Популярные бренды

Mercury 200 Optimax, Руководство пользователя

Результаты поиска

Содержание 200 Optimax

Отзывы:

Похожие инструкции для 200 Optimax

Бренды по названию

Популярные бренды