PURSUIT 3070 EXPRESS, Руководство пользователя

Страница: 46 / 167

3070 OFFSHORE
46
Aft Bilge
The aft bilge pump breaker is located on the TABS and provides protection for the automatic float
switch on the aft bilge pump. This "push to reset" breaker is always supplied current when the
batteries are connected. Another breaker in the helm provides circuit protection for the manual
switch.
DC Power
The DC power breaker is located on the TABS and provides protection for all DC power to the
Cabin DC breaker panel. This is a "push to reset" breaker that is normally on all the time, when
activated by the house battery switch on the TABS, unless tripped by an overload.
Stereo Memory
The stereo memory power breaker is located on the TABS and provides protection and power for
the stereo memory. This "push to reset" breaker is always supplied current when the batteries are
connected.
Mid Sump
The mid sump breaker is located on the TABS and supplies 12-volt electrical current directly to the
cabin drain float switch which automatically controls the air conditioner drain and shower drain
sump pump. This "push to reset" breaker is always supplied current when the batteries are
connected unless tripped by an overload. Make sure this breaker is on before using the cabin
shower or activating the air conditioner.
Engine Circuit Breakers or Fuses
There are circuit breakers or fuses located on each engine that provide protection for the ignition
systems, electric fuel pump, charging system and other accessories unique to the engines installed
in your boat. Please refer to the engine owner's manual for information on the circuit breakers or
fuses installed on your engines.
Phone and TV Cable Inlet (Optional)
The optional TV and telephone cable inlet is mounted below the step in the cockpit. It allows the
boat to be connected to shore side cable television or telephone service.
4.3 AC System
The AC system is fed by the shore power outlet or by the optional generator. It is wired totally
separate from the 12-volt DC system and is equipped with an on-board galvanic isolation system.
All AC current is distributed to the AC accessories through individual circuit breakers located in
the AC panel. The main breaker in the panel protects the system from an overload and the reverse
polarity light indicates any problems due to an improper shore power supply. All AC outlets in
the cabin are protected by ground fault interrupters to protect against electrical shock. A cord set
is provided to supply power from the shore power outlet to the boat’s AC system.