PURSUIT 3070 EXPRESS, Руководство пользователя

Страница: 73 / 167

3070 OFFSHORE
73
Windshield
The Pursuit 3070 Offshore is equipped with a vented heavy duty aluminum windshield with tinted
glass and built in hand rails. The windshield is equipped with an opening vent panel on each side
of the windshield. To open the vent, release the locking T-handle and rotate it outboard until it locks
in place. To prevent damage to the vent glass, do not leave the T-handle in the unlocked position.
The front and side wing panels are tempered safety glass. The curved glass panels on the port and
starboard side of the windshield are made of tinted acrylic plastic glass. Acrylic glass scratches
easily. Never use a dry cloth or glass cleaning solutions on acrylic. Use a soft cloth and mild soap
and water for routine cleaning. Solvents and products containing ammonia can permanently
damage acrylic. Please refer to the Routine Maintenance chapter for more information on the
proper care and maintenance of acrylic plastic glass.
9.2 Hull
Swim Platform
Your Pursuit is equipped with an integral swim platform and engine mounting system located in
the stern of the boat. There are three inspection deck plates in the transom engine well to provide
access to the stern bilge and engine mounting bolts. Always make sure these plates are secure
before operating your boat.
Boarding Ladder
The boarding ladder is mounted to the rear of the stern bait and
tackle rigging station when it is in the stored position. To use
the ladder, remove it from the storage clips and slide the studs
into the special bracket on the port side of the transom. The
ladder floats and must be secured in the boarding position by
turning the cam lock on the ladder so it catches the bottom of
the transom ladder bracket. The ladder must be removed from
the transom bracket and properly secured to the storage clips
before starting the engine(s).
MOVING PROPELLERS ARE DANGEROUS. THEY CAN CAUSE DEATH,
LOSS OF LIMBS, OR OTHER SEVERE INJURY. DO NOT USE THE SWIM
PLATFORM OR SWIM LADDER WHILE THE ENGINE(S) ARE RUNNING.
STOP THE ENGINE(S) IF DIVERS OR SWIMMERS ARE ATTEMPTING TO
BOARD. ALWAYS REMOVE AND PROPERLY STORE THE LADDER BEFORE
STARTING THE ENGINE(S).
Boarding Ladder