PURSUIT 3070 EXPRESS, Руководство пользователя

Страница: 19 / 167

3070 OFFSHORE
19
Chapter 1:
PROPULSION SYSTEM
1.1 General
The Pursuit 3070 Offshore is designed to be powered with twin 2-cycle or 4-cycle outboard motors.
Each manufacturer of the various outboard motors provides an owner’s information manual with
its product. It is important that you read the manual(s) very carefully and become familiar with the
proper care and operation of the engine and drive system. A warranty registration card has been
furnished with each new engine and can be located in the engine owner’s manual. All information
requested on this card should be filled out completely by the dealer and purchaser and then returned
to the respective engine manufacturer as soon as possible.
DO NOT ATTEMPT TO SERVICE ANY ENGINE OR DRIVE COMPONENT
WITHOUT BEING TOTALLY FAMILIAR WITH THE SAFE AND PROPER
SERVICE PROCEDURES. CERTAIN MOVING PARTS ARE EXPOSED AND
CAN BE DANGEROUS TO SOMEONE UNFAMILIAR WITH THE OPERATION
AND FUNCTION OF THE EQUIPMENT.
DO NOT INHALE EXHAUST FUMES! EXHAUST CONTAINS CARBON MON-
OXIDE THAT IS COLORLESS AND ODORLESS. CARBON MONOXIDE IS A
DANGEROUS GAS THAT IS POTENTIALLY LETHAL.
1.2 Corrosion
Each outboard motor is a complete drive system with the gear case being just forward of the
propeller and connected to the power head with a vertical drive shaft. Other than the routine
maintenance outlined in the engine owner’s manual, there is little to be concerned with unless the
boat is to be kept in saltwater for extended periods of time. Then the main concerns are marine
growth and galvanic corrosion.
Marine growth occurs when components are left in the water for extended periods and can cause
poor performance or permanent damage to the exposed components. The type of growth and how
quickly it occurs is relative to the water conditions in your boating area. Water temperature,
pollution, current, etc. can have an effect on marine growth.