PURSUIT 3070 EXPRESS, Руководство пользователя

Страница: 123 / 167

3070 OFFSHORE
123
Supporting The Boat For Storage
A trailer, elevating lift or a well-made cradle is the best support for your boat during storage.
When storing the boat on a trailer for a long period:
•
Make sure the trailer is on a level surface and the bow is high enough so that water will drain
from the bilge and cockpit.
• The trailer must properly support the hull. The bunks and rollers should match the bottom of
the hull and should not be putting pressure on the lifting strakes.
• Make sure the hitch is properly supported.
• Check the tires once each season. Add enough air for the correct amount of inflation for the
tires.
Note: Read the owner’s manual for the trailer for the correct amount of inflation for the
tires.
When storing the boat on a lift or cradle:
•
The cradle must be specifically for boat storage.
• Make sure the lift or cradle is well supported with the bow high enough to provide proper
drainage of the bilge.
• Make sure the engines are in the down position.
• The cradle or lift must be in the proper fore and aft position to properly support the hull. When
the cradle or lift is in the correct location, the bunks should match the bottom of hull and should
not be putting pressure on the lifting strakes.
BOATS HAVE BEEN DAMAGED BY TRAILERS, LIFTS AND CRADLES THAT
DON’T PROPERLY SUPPORT THE HULL. ALWAYS MAKE SURE THE
BUNKS AND ROLLERS ARE ADJUSTED SO THEY ARE NOT PUTTING
PRESSURE ON THE LIFTING STRAKES AND ARE PROVIDING ENOUGH
SUPPORT FOR THE HULL. HULL DAMAGE RESULTING FROM IM-
PROPER CRADLE OR TRAILER SUPPORT IS NOT COVERED BY THE PUR-
SUIT WARRANTY.
Preparing The Boat For Storage:
• Remove the bilge drain plug(s), if installed.
• Thoroughly wash the fiberglass exterior, especially the antifouling portion of the bottom.
Remove as much marine growth as possible. Lightly wax the exterior fiberglass components.
NOTICE