PURSUIT 3070 EXPRESS, Руководство пользователя

Страница: 55 / 167

3070 OFFSHORE
55
Chapter 5:
FRESH WATER SYSTEM
5.1 General
The fresh water system consists of a potable water tank, distribution lines and a distribution pump.
The pump is equipped with an automatic pressure switch and is located in the stern bilge. An in-
line strainer located near the pump protects the system from debris. The tank is filled through a
labeled deck plate located on the gunnel.
DO NOT FILL SYSTEM WITH ANYTHING OTHER THAN WATER. SHOULD
THE SYSTEM BECOME CONTAMINATED WITH FUEL OR OTHER TOXIC
FLUIDS, COMPONENT REPLACEMENT MAY BE NECESSARY.
DO NOT CONFUSE FUEL FILL DECK PLATES WITH THE WATER OR
WASTE FILL DECK PLATES. THESE PLATES ARE ALSO LABELED AC-
CORDINGLY. IF GASOLINE IS ACCIDENTALLY PUMPED INTO THE WA-
TER OR WASTE TANK, DO NOT ATTEMPT TO PUMP IT OUT YOURSELF.
WATER AND WASTE PUMPS ARE NOT DESIGNED TO PUMP FUEL AND
A FIRE OR EXPLOSION COULD RESULT. CONTACT YOUR DEALER OR
PURSUIT CUSTOMER RELATIONS FOR ASSISTANCE IN HAVING THE FUEL
PROFESSIONALLY REMOVED.
5.2 Fresh Water System Operation
Fill the water supply tank slowly through the labeled deck plate. After filling the water tank,
partially open all faucets. The “Fresh Water System” breaker on the cabin DC panel should be on.
Allow the pump to run until all of the air is purged from the system and a steady stream of water
is flowing from each outlet. Next, turn off the faucets one by one. As the pressure builds, the pump
will automatically shut off.
When properly primed and activated, the water system will operate much like the water system in
a home. An automatic pressure sensor keeps the system pressurized. If the system has been recently
filled or has not been used for an extended period, air bubbles may accumulate at the pump and the
system may have to be reprimed.
Whenever the boat is left unattended, the “Fresh Water System” breaker should be placed in the
“OFF” position.