Prophete REX ATB, Руководство по эксплуатации

Страница: 117 / 308

Eng
lish
EN 55
TORQUE SPECIFICATIONS
Wheel nuts, front
Wheel nuts, rear
20-25 Nm
25-30 Nm
Foot pedal arm, steel
Foot pedal arm, aluminium
30 Nm
30-35 Nm
Pedals
30–35 Nm
Stem, clamping screw
A-Head stem, clamping screws
Handlebar clamping block screw (2xM6) handlebar
clamping block screw (4xM5)
Handlebar bracket attachment
20–30 Nm
9–11 Nm
10–14 Nm
6 Nm
20 Nm
Brake shoes
Brake disc attachment
5–7 Nm
5–7 Nm
Attachment of side dynamo
10 Nm
Damper/Shock 10 Nm
Seat post clamping ring
Saddle clamp
8–12 Nm
18–22 Nm
Other steel screws
Other
VA screws A2/A4
Size / strength class 5.6 6.8 8.8 10.9 50 70 80
M3 0.7 Nm 0.9 Nm 1.2 Nm 1.7 Nm - - -
M4 1.7 Nm 2.1 Nm 2.8 Nm 4.1 Nm - - -
M5 3.4 Nm 4.3 Nm 5.5 Nm 8.1 Nm 1.7 Nm 3.5 Nm 4.7 Nm
M6 5.9 Nm 7.3 Nm 9.6 Nm 14 Nm 3 Nm 6 Nm 8 Nm
M8 14.3 Nm 17.8 Nm 23 Nm 34 Nm 7.1 Nm 16 Nm 22 Nm
• The screws and nuts installed on the bicycle must be checked for tight fit at regular in -
tervals (see maintenance plan) and may need to be tightened or re-tightened to the
proper strength. Only this can ensure that the bicycle permanently complies with the
safety-technical requirements and works properly.
• If screw and nuts are tightened too far, they may break. Danger of damage and acci-
dents!
• If parts are marked with torque specifications, these must be complied with. The
torque wrench permits precise compliance with the tightening torques.
• The torque specifications for other screw connections do not apply to the adjustment
screws at the gearshift and brake components.
DANGER
WARNING
TORQUE SPECIFICATIONS