4.
As soon as the value has been set, press the
[right arrow key] to acknowledge the value and move to the
next menu. Or press EXIT to exit the menu and return to
AUTO.
6.5.17 Selecting logged files to download
This menu allows CSV files to be downloaded to a flash drive.
The selection options are
n
No download (NO),
n
Calibration file only (CAL),
n
All files (ALL)
n
Individual months (Jan, Feb...).
Press the EXIT key as soon as the memory stick has been inserted
into the USB slot on the right side of the device. You will receive an
error message (Err) if no memory stick is inserted. The upper dis‐
play flashes while the download is in progress and shows dOnE
once the download has ended.
1.
Call up CONFIG mode by pressing the UP or DOWN keys
until the arrow lights up beside CONFIG. Then press EXIT.
2.
Press the
[right arrow key] to move to the next menu until
DOWN is displayed.
A3449
Fig. 33: Data download
3.
The selection can be adapted using the UP or DOWN keys.
4.
As soon as the selection has been made, press the
[right arrow key] to acknowledge the selection and move to
the next menu. Use the EXIT key to move to the next menu
to exit it and return to AUTO.
6.5.18 Setting the time and date
The DULCO turb C features a display for the date (month / day /
year) and time (hour / minute / summertime), which must be set
during initial installation/set-up.
1.
Call up CONFIG mode by pressing the UP or DOWN keys
until the arrow lights up beside CONFIG. Then press EXIT.
2.
Press the
[right arrow key] to move to the next menu until
MNTH is displayed. Then press EXIT.
Setting the data download:
Setting the month
Commissioning
45