Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
43
www.promega.com
TM397 · Revised 12/16
4.
Creating a New Template
Analysis templates define the curve fit type, data types, well naming, concentrations/dilution factors and units that
will be applied to the analysis of raw data from a plate read operation.
a. From the ‘Home’ screen, touch the
Results
button.
b. On the left side of the ‘Protocols Execution Results’ screen, touch the
Templates
button.
c. Touch the
New Template
button in the bottom left hand corner of the ‘Templates’ screen in order to
create a new analysis template. If you wish to modify an existing template, simply touch the template
entry on the list and then proceed to Step f.
d. Select the plate format for the new analysis template from the drop-down list on the ‘Select Plate Size’
screen and touch
OK
. Options include: 6-, 12-, 24-, 48-, 96- and 384-well plates (Figure 48).
e. The ‘New Template’ screen will open with analysis options on the left side and a plate map on the right
hand side (Figure 49).
Fi
13906T
A
gure 48. The ‘Select Plate Type’ screen.
When creating a new analysis template, the first step is to select the
plate format for the analysis template from the drop-down list on the ‘Select Plate Type’ screen.
