Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
31
www.promega.com
TM397 · Revised 12/16
3.
Begin building the desired workflow by dragging and dropping the desired steps into the kinetic step. They
should be contained within the kinetic step.
F
11650T
A
igure 34. Steps contained within a kinetic function.
4.
Select the number of readings and interval (seconds) between each reading.
Note:
Typically the protocol steps are completed before the completion of the interval time, and therefore the
instrument will pause until the completion of the interval time duration. However, if the protocol steps take
longer to complete than the interval time, the protocol will complete all steps and then immediately continue
without pausing for the interval time duration. Otherwise, once all steps are completed the protocol will pause
until the interval time duration has been reached.
5.
Rearrange the steps by touching and dragging the step.
3.D. ‘Results’ Screen
When running a protocol, the results will display in real-time as the protocol proceeds. Results are automatically
saved within the GloMax
®
Discover Software. However, they can also be exported to a variety of locations,
including the local Tablet PC, to a USB flash drive, a network drive, or to a cloud location. Results can also be
analyzed using the Analysis functions in the GloMax
®
Discover Software as described in Section 3.E, Analysis of
Results.
1.
To view results from previous runs, from the ‘Home’ screen, tap the
Results
button.
a.
The Left Navigation column of the ‘Protocols Execution Results’ screen presents the user with several
options regarding the displayed information and functions that can be performed.
i.
At the top of the Left Navigation column, the user can filter the displayed information by time
period:
Today
,
This Month
, the last
6 Months
, anytime
This Year
or
All
of the results.
ii. In the center of the Left Navigation column, the user can choose to view
Results
,
Templates
,
and
Analyses
. Creating Analysis Templates and performing Analyses are covered in Section 3.E,
Analysis of Results.
